note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: RA0085B doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / sdad10 1 _ _ _ _ _ _ _ _ screening 2 / __ = not screened tx = tx level txv = txv level s = s level reverse recovery time uf = ultra fast recovery time voltage 2.5 = 2.5kv, 5 = 5kv, 7.5 = 7.5kv, 10 = 10kv, and 15 = 15kv power rating (see below) package size = 1 inch diameter sdad101 uf series 2,500 to 15,000 volts ultra fast recovery stackable high voltage rectifier features: ? stackable to 600 kv+ ? piv 2.5 kv to 15 kv ? ultra fast reverse recovery time ? only hermetically sealed rectifiers used ? controlled avalanche rated ? modular design for easy stacking ? storage and operating temps -65 c to +150 c ? available in standard, fast and hyper fast versions ? tx, txv, and s-level screening available 2 / electrical characteristics 3 / part number peak inverse voltage reverse recovery time 5 / average dc output current tc = case temperature 4 / surge non- repetitive maximum forward voltage drop maximum leakage current @piv piv (kv) max (ns) if(avg) ifsm vf (v) if (a) ir (ua) 25 ? c 25 ? c 75 ? c 50 ? c 100 ? c 25 ? c 25 ? c sdad101 h 2.5 uf 2.5 70 1.62 3.60 125 3.96 1.62 20 sdad101 h 5.0 uf 5.0 70 0.95 2.34 125 6.71 0.95 20 sdad101 h 7.5 uf 7.5 70 0.81 1.80 125 9.90 0.81 20 sdad101 h 10 uf 10 70 0.68 1.35 125 13.0 0.68 20 sdad101 h 15 uf 15 70 0.54 0.95 25 18.9 0.54 20 sdad101 package: notes: 1 / for ordering information, pric e, curves, and availability- contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / unless otherwise specified, all electrical characteristics @25oc. 4 / tc = 50 oc typical operation in oil. tc = 75 oc is typical ambient ta = 25 oc unheatsunk. 5 / recovery conditions: i f = 0.5 amp, i r = 1.0 amp rec. to .25 amp.
|